Tap-caps are a breather tap fitted to a cap which is then used on a jerry can to pour or decant product safely and cleanly. Usually we make these using a specially formed cap (chimney cap) which the tap punches into. However, we can make tap-caps out of most caps so please ask if you have a particular cap that you wish to use. There are a wide range of tap-caps available with different tap colours and sizes as well as cap colours and sizes.
Outlet rotates to orient in correct position.
Flow rate is 70ml/second (water viscosity) for Aeroflow Taps and 30ml/second for Smooth Flow Taps.
LLDPE body, PP spigot, natural rubber washer. Food grade with wide chemical compatibility.
Use with clip-on nozzle (code 204676 (7&8*) to reduce outlet to 12mm if filling into a narrow opening e.g. spray bottles. Or use Smooth Flow Tap (12mm outlet) versions.
For safety and to prolong the life of your taps we recommend always returning the container to the upright position when not in use. Flush tap with clean water when changing containers and more regularly if possible.
Taps made by Worldwide Dispensers
Below are the tap-caps we make using 55mm Blow Moulders caps, 56mm plastic or steel caps for steel jerry cans or 58mm caps which fit Alto, VIP, EPI Passion Plastics and Forward Plastics jerry cans. For other sizes please see the tap-cap heading relating to each size. This is a common size in NZ and Australia. Please see NW50 Tap-Caps for European jerry cans.
*Images shown
Aeroflow Tap (18mm outlet) available in red/natural and white/natural
Codes for Aeroflow Taps fitted to 55mm caps for Blow Moulders jerry cans
700824 Red tap with red cap (*2)
Codes for Aeroflow Taps fitted to 56mm caps for steel jerry cans
700821 (*3) Red tap with steel cap (the plastic cap has now been replaced with a steel cap and we hold stock of the Smoothflow version (700433).
Codes for Aeroflow Taps fitted to 58mm caps for VIP, EPI Passion Plastics, Forward Plastics jerry cans
(58mm caps available in black and red. Other colours available on request and minimum order quantities may apply)
700830 White tap with black cap
700833 Red tap with black cap (best seller)(*1)
700835 White tap with red cap (*4)
Smooth Flow Tap (12mm outlet) available in white with blue spigot plug. We can fit different coloured plugs but minimums may apply.
Codes for Smooth Flow Taps fitted to 55mm caps for Blow Moulders jerry cans
700416 white tap with red cap
Codes for Smooth Flow Taps fitted to steel 56mm caps for steel jerry cans
700433 (this has replaced 700436 white tap with black 56mm plastic cap) (*5)
Codes for Smooth Flow Taps fitted to 58mm caps for VIP, EPI Passion Plastics, Forward Plastics jerry cans
700420 White tap with red cap (6*)
700422 White tap with black cap
SKU: 700416, 700420, 700422, 700433, 700436, 700820, 700824, 700830, 700833, 700835 - Need Help? Contact Us Leave Feedback
Categories: Breather Taps & Tap-Caps, Taps - Plastic Taps and Alloy Taps for Jerry Cans, Drums & Driplines
Tags: 58mm cap, jerry can tap, plastic tap, tap-caps
Contact Us
info@3swans.co.nz
ph +64 (07) 850 9581
fax +64 (07) 850 9582
3 SWANS LTD.
Unit 13, 9 Karewa Place,
Pukete,
HAMILTON, 3200
NEW ZEALAND
Leave Feedback
info@3swans.co.nz
ph +64 (07) 850 9581
fax +64 (07) 850 9582
3 SWANS LTD.
Unit 13, 9 Karewa Place,
Pukete,
HAMILTON, 3200
NEW ZEALAND