Tap-caps are a breather tap fitted to a cap which is then used on a jerry can to pour or decant product safely and cleanly. Usually we make these using a specially formed cap (chimney cap) which the tap punches into. However, we can make tap-caps out of most caps so please ask if you have a particular cap that you wish to use. There are a wide range of tap-caps available with different tap colours and sizes as well as cap colours and sizes.
Outlet rotates to orient in correct position.
Flow rate is 70ml/second (water viscosity) for Aeroflow Taps and 30ml/second for Smooth Flow Taps.
LLDPE body, PP spigot, natural rubber washer. Food grade with wide chemical compatibility.
Use with clip-on nozzle (code 204676*) to reduce outlet to 12mm if filling into a narrow opening e.g. spray bottles. Or use Smooth Flow Tap (12mm outlet) versions.
For safety and to prolong the life of your taps we recommend always returning the container to the upright position when not in use. Flush tap with clean water when changing containers and more regularly if possible.
Taps made in Slovakia by Worldwide Dispensers (part of Liquibox, SEE)
Below are the tap-caps we make using 44mm steel caps for steel containers, or 45mm plastic caps which fit Alto Industrial jerry cans. For other sizes please see the tap-cap heading relating to each size.
*images shown
Aeroflow Tap (18mm outlet) available in red/natural and white/natural
Codes for Aeroflow Taps fitted to Alto 45mm caps for 5L industrial jerry cans
700293 White tap with white cap
700294 Red tap with white cap*
Smooth Flow Tap (12mm outlet) available in white with blue spigot plug. We can fit different coloured plugs but minimums may apply.
Code for Smooth Flow Taps fitted to 44mm steel caps
700434 White tap with 44mm cap for steel cans*
Codes for Smooth Flow Taps fitted to 45mm Alto caps for 5L industrial jerry cans
700410 White tap with red 45mm cap*
700415 White tap with white 45mm cap
