Valve cap for Schutz Integrated Camlock valves, Mark II, 62mm ID. 13mm deep. Black with clear gasket or no gasket/cone seal. See code 500747 for the smaller diameter Mark I cap.
Integrated camlock valves have the camlock piece moulded as part of the valve (some common versions and our version shown in the gallery, code 800212cm). There are two versions of Schutz Integrated Camlock valves. They both have a shallow (approx 1cm deep) fine thread. Mark I is standard 2″ BSP (57-61mm). Mark II is slightly larger at 62mm. This is further explained in the video.
On both caps the thread is too shallow for a threaded adaptor so you must use a female camlock adaptor with locking arms to clip onto the male camlock.
Please see our codes 800559, 800560, 800561 for adaptor options or 500764 for a lock-on dust cap. If you need a 3 piece cap and nozzle we can drill out this cap so nozzle 800260 fits in it. The standard BSP version, 500768, will not fit on this thread.
ph +64 (07) 850 9581
fax +64 (07) 850 9582
3 SWANS LTD.
Unit 13, 9 Karewa Place,