3 Swans Limited - Intelligent dispensing solutions with advice you can trust
See our Catalogue & Product Info page for summaries & further information on our product ranges

500745s NW50 IBC Screw Cap with 3/4″ Thread Adaptor

500745s NW50 IBC Screw Cap with 3/4″ Thread Adaptor

Print Friendly, PDF & Email

IBC cap with the common NW50 (DIN61, DN60) coarse thread (56-62mm ID). In the centre is a 3/4″ thread for a tap or other 3/4″ BSP fitting. It also comes with a bowl gasket which must be removed when the tap is connected.

Black HDPE with white PE foam gasket (Alveolit) and LDPE bowl gasket (bowl gasket holds foam gasket in place during transportation and is removed when the cap is in use).

Commonly used with the Water Butt Tap with Hose Connector (406130) we sell the combination as code 700747 – Tap-Cap combo. A standard garden hose connector clips onto the tap. Commonly used on IBCs storing water on lifestyle blocks and building sites and well as in industrial applications.

Please note that 500745s has slots in the 3/4″ BSP thread and therefore requires a 3/4″ gasket if you wish to use it with a pipe that does not have a gasket already (these are free but you need to note it on your PO).  It is suitable for use with a tap or hose with a gasket.

For the plain (blank) version of this cap please see code 500743. The 3 piece version for a nozzle is 500746.

Made by KTH – Germany

SKU: 500745 700747 - Need Help? Contact Us Leave Feedback

Categories: , , , , , ,

Tags: , , , ,