3 Swans Limited - Intelligent dispensing solutions with advice you can trust
We now have a cap tightener for Alto 38mm Caps - 800407

Drum & Jerry Can Pump 132000 – out of stock

Drum & Jerry Can Pump 132000 – out of stock

Print Friendly, PDF & Email

Aug 2021 Out of Stock! We are no longer stocking this pump due to the increased cost of the item and freight from the USA due to COVID-19. However, we can bring them in as required (MOQ applies). If you require a jerry can pump please contact us for the best options. For Drum pumps see code 133010.

Beckson drum pumps are made in the USA with PVC bodies, viton valve and seal, and clear PVC outlet tubes for wide chemical compatibility for acids and alkalis.

Our code 132000 is a CP1848S chemical transfer pump with siphon or lift action.

Adaptors: Comes with a 2″ NPT adaptor. If your drum has a coarse thread we have a range of adaptors to suit most drums. Alternatively these pumps can be fitted to jerry can caps to suit your container.

Dose: Siphons 5L/min or pumps 225/stroke.

Size: Body 47cm with extra dip tube (45cm) to reach the bottom of a 205L drum approximately 90cm deep. The outlet hose is 14mmOD x 1.2m long.

A straplock (yellow) is supplied so the pump can be padlocked. If not using the locking function the outlet hose can be hooked through the holes in the straplock to prevent product running on.

To prolong the life of any pump we recommend regular flushing with clean water. This drum pump is not suitable for solvents or drinking water as they are not food grade.

Please read this information regarding safety and chemical Compatibility: Beckson Safety Usage Info and Chem Compatibility

For further information: Drum and Water Pumps

Made by Beckson Industrial Products, USA

SKU: 132000 - Need Help? Contact Us Leave Feedback

Categories: ,

Tags: ,